TP-Link CPE210 2.4GHz High Power 300Mbps Outdoor Wireless Access Point / CPE

Description

Overview:
TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is
dedicated to cost effective solutions for outdoor wireless networking
applications. With its centralized management application, it is flexible and
ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage
applications.  Professional performance, coupled with user-friendly
design, makes CPE210 an ideal choice for both business and home users.
Features:
Built-in 9dBi 2×2 dual-polarized
directional MIMO antenna
Adjustable transmission power
from 0 to 27dBm/500mw
System-level optimizations for
more than 5km long range wireless transmission
TP-LINK Pharos MAXtream TDMA
(Time-Division-Multiple-Access) technology improves product performance in
throughput, capacity and latency performance, ideal for PTMP applications
Centralized Management System –
Pharos Control
AP / Client / Bridge / Repeater /
AP Router / AP Client Router (WISP) operation modes
Passive PoE Adapter supports up
to 60 Meter (200 feet) Power over Ethernet deployment and allows the
device to be reset remotely
Specification:
HARDWARE FEATURES
Processor
Qualcomm Atheros 560MHz CPU, MIPS
74Kc
Memory
64MB DDR2 RAM, 8MB Flash
Interface
1 10/100Mbps Shielded Ethernet Port
(LAN, Passive PoE in)
1 Grounding Terminal
1 Reset Button
Power Supply
Passive Power over Ethernet via LAN0
(+4,5pins; -7,8pins)
Voltage range: 16-27VDC
Power Consumption
10.5 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source
will be higher by some amount depending on the length of the connecting
cable.
Antenna Type
Built-in 9dBi 2×2 Dual-polarized
Directional Antenna
Beam Width: 65° (H-Plane) / 40° (E-Plane)
Note: For more details, please refer to datasheet
Protection
15KV ESD Protection
6KV Lightning Protection
Enclosure
Outdoor ASA stabilized plastic
material
IPX5 waterproof Certification
Dimensions (W X D X H)
224 x 79 x 60 mm
WIRELESS FEATURES
Wireless Standards
IEEE 802.11b/g/n (with Pharos
MAXtream disabled)
Proprietary Protocol
TDMA Mode (with Pharos MAXtream
enabled)
Wireless Speeds
Up to 300Mbps (40MHz, Dynamic)
Up to 144.4Mbps (20MHz, Dynamic)
Up to 72.2Mbps (10MHz, Dynamic)
Up to 36.1Mbps (5MHz, Dynamic)
Frequency
2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations of
the countries or regions in which the device is used.
Transmission Power
27dBm/500mw (Adjustable power by
1dBm)
Note: Maximum transmission power may vary across different channels depending
on the limitations of the countries or regions in which the device is used.
SOFEWARE FEATURES
Wireless Configurations
Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit
WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management
Discovery and Remote Management via
Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
System Tools
Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
System-level Optimizations
Optimized IGMP Snooping/Proxy for
multicast applications
Hardware watch dog
PoE ADAPTER FEATURES
Interfaces
1 AC Jack with Earth Ground
1 10/100Mbps Shielded Ethernet Port (Power + Data)
1 10/100Mbps Shielded Ethernet Port (Data)
Efficiency
>80%
Button
Remote Reset Button
Certifications
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
Power Status LEDs
Green
Input
100-240VAC, 50/60Hz
Output
24VDC, 0.6A Max
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Dimensions(W x D x H)
110*57*33.5 mm
OTHERS
Certification
CE, FCC, RoHS, IPX5
Package Contents
Outdoor Wireless CPE
24V 0.6A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation Guide
System Requirements
Microsoft Windows 98SE, NT, 2000,
XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or
Linux.
Note: We recommend you to use one of following Web browsers for an improved
user experience: Google Chrome, Safari, and Firefox. IE browsers are not
recommended.
Environment
Operating Temperature: -40℃~70℃
(-40℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing
Return
Policy:
Seller provides 30-DAY Return Policy
provided that the procedures and requirements referred to below are followed:
Refunds or exchanges may only be
made within 30 days of receiving the merchandise.  If an item has been opened or used, a 25%
processing fee will be applied for a refund or an exchange.
Products that are returned to Seller with missing, damaged or altered Box, Parts, or Accessories will be either
refused or charged a processing fee equal or greater than 25%.
All other returns due to the
reason of Order by Mistake, Change of Mind, Doesn’t Fit, Found Better Price are subject
to a 30% deduction of the original purchase price.  This processing fee is to cover the
2-Way shipping fees of shipping to you and getting the product back.  Please read the description thoroughly
to ensure it is the right product for you. 
Please feel free to ask if you have any question prior to placing
the order.